เมนู เมนู
ปิด

ค้นหาจากหมายเลขอ้างอิง

คอนโดมิเนียม

51000 Rijeka

อพาร์ทเม้นท์ในคอมเพล็กซ์หรูใหม่ - บรรทัดแรก

โครงการที่อยู่อาศัยบูติกพร้อมโรงรถและทิวทัศน์ทะเลอันน่าทึ่งในรีเยกา!- เส้นที่ 1 ถึงทะเล

รพ. 1.ชั้น -2 108 ตรม. อพาร์ทเมนท์ 2 ห้องนอนราคาคือ 599 000 ยูโร

ราคาขาย
€599,000 (฿22,816,284)
ห้อง
3
ห้องนอน
2
ห้องน้ำ
2
พื้นที่ใช้สอย (ตร.ม.)
108 ตารางเมตร

รายละเอียดพื้นฐาน

จำนวนรายการ 669716
การก่อสร้างใหม่ ใช่
ราคาขาย €599,000 (฿22,816,284)
ห้อง 3
ห้องนอน 2
ห้องน้ำ 2
ห้องน้ำพร้อมห้องสุขา 2
พื้นที่ใช้สอย (ตร.ม.) 108 ตารางเมตร
พื้นที่ส่วนอื่นๆ (ตรม.) 20 ตารางเมตร
คำอธิบายพื้นที่ใช้สอย The foundations consist of a solid reinforced concrete slab with a thickness of 40 to 50 cm, fully waterproofed. Load-bearing walls are cast in-place reinforced concrete, formed using double-sided formwork and reinforced according to structural calculations. The wall thickness ranges from 15 to 25 cm and includes vertical and horizontal reinforced concrete tie beams. Basement walls located below ground level are protected with waterproofing. Partition walls are constructed using drywall (Knauf system) with a thickness of 10 to 15 cm. Floor slabs between levels are solid reinforced concrete with a thickness of 20 to 24 cm. The roof is a flat, walkable structure consisting of a 20 cm thick reinforced concrete slab, with thermal and waterproof insulation. Apartment floors are constructed as level floating floors with thermal insulation made of expanded polystyrene (EPS) 10 to 15 cm thick, over which screed and the final floor finish are applied. Cold floor areas are finished with first-class glazed ceramic tiles, while warm floor areas are finished with prefinished parquet. Interior staircases are made of reinforced concrete and finished with ceramic tiles. Entrance and terrace floors are finished with anti-slip ceramic tiles. Interior walls and ceilings are treated with rough and fine cement-lime plaster or plasterboard (Knauf), then smoothed and painted with light-colored semi-dispersive paint to enhance the reflection of natural and artificial light. In kitchen work areas, walls between base and wall cabinets are tiled with ceramic tiles. In bathrooms, ceramic tiles are applied up to a minimum height of 2.40 meters. Openings are designed to provide lasting protection against weather conditions, ensure natural lighting, thermal insulation, and ventilation during the building’s use. Natural lighting is provided through window and door openings, while artificial lighting is installed as needed according to the function of the space. Windows and external doors are fabricated from thermally broken aluminum profiles (SCHUCO AWS65), factory-produced and fitted with the necessary hardware. They are finished in anthracite color (RAL 7016) and glazed with triple-pane insulating glass (4 mm + 16 mm argon + 4 mm + 16 mm argon + 4 mm) with a low-emissivity (Low-E) coating. External shading is provided by motorized shutters or brise-soleils. Interior window sills are made of composite quartz, resistant to moisture, scratches, and impact, with a smooth surface. External sills are made of aluminum and finished to match the window frames. Interior doors are standard-size, dry-installed, solid or glazed, and veneered. The façade features a ventilated system with 10 cm thick mineral wool insulation and a cladding of natural stone panels. A portion of the basement levels is finished with an ETICS façade system, using 10 cm thick extruded polystyrene (XPS) insulation and a 0.5 cm thick light-colored polymer render. Soffits, cornices, balconies, and canopies are finished with a 0.5 cm thick layer of light-colored polymer render applied over 3 cm of thermal insulation. The flat roof is constructed from a 20 cm thick reinforced concrete slab, thermally and waterproof insulated. It is designed as a walkable terrace with a sun deck and swimming pool, including an equipment room for pool systems located beneath the sun deck. The slope of the roof surfaces is 1°. The roof is covered with ceramic tiles. Rainwater drainage is managed using roof drains and channels. Plumbing installations are executed according to the requirements for mixed residential and commercial use. Electrical installations are provided in all rooms. Heating and cooling in residential areas are powered by electricity using a combination of air-to-air multi-split systems and Daikin air-to-water heat pumps. In commercial areas, Daikin multi-split air conditioning systems are used. Circulation within the building is designed to enable fast and safe evacuation in emergencies. Vertical connection between floors is provided by internal staircases, a passenger lift, and a vehicle lift.
คำอธิบายของพื้นที่อื่นๆ The foundations consist of a solid reinforced concrete slab with a thickness of 40 to 50 cm, fully waterproofed. Load-bearing walls are cast in-place reinforced concrete, formed using double-sided formwork and reinforced according to structural calculations. The wall thickness ranges from 15 to 25 cm and includes vertical and horizontal reinforced concrete tie beams. Basement walls located below ground level are protected with waterproofing. Partition walls are constructed using drywall (Knauf system) with a thickness of 10 to 15 cm. Floor slabs between levels are solid reinforced concrete with a thickness of 20 to 24 cm. The roof is a flat, walkable structure consisting of a 20 cm thick reinforced concrete slab, with thermal and waterproof insulation. Apartment floors are constructed as level floating floors with thermal insulation made of expanded polystyrene (EPS) 10 to 15 cm thick, over which screed and the final floor finish are applied. Cold floor areas are finished with first-class glazed ceramic tiles, while warm floor areas are finished with prefinished parquet. Interior staircases are made of reinforced concrete and finished with ceramic tiles. Entrance and terrace floors are finished with anti-slip ceramic tiles. Interior walls and ceilings are treated with rough and fine cement-lime plaster or plasterboard (Knauf), then smoothed and painted with light-colored semi-dispersive paint to enhance the reflection of natural and artificial light. In kitchen work areas, walls between base and wall cabinets are tiled with ceramic tiles. In bathrooms, ceramic tiles are applied up to a minimum height of 2.40 meters. Openings are designed to provide lasting protection against weather conditions, ensure natural lighting, thermal insulation, and ventilation during the building’s use. Natural lighting is provided through window and door openings, while artificial lighting is installed as needed according to the function of the space. Windows and external doors are fabricated from thermally broken aluminum profiles (SCHUCO AWS65), factory-produced and fitted with the necessary hardware. They are finished in anthracite color (RAL 7016) and glazed with triple-pane insulating glass (4 mm + 16 mm argon + 4 mm + 16 mm argon + 4 mm) with a low-emissivity (Low-E) coating. External shading is provided by motorized shutters or brise-soleils. Interior window sills are made of composite quartz, resistant to moisture, scratches, and impact, with a smooth surface. External sills are made of aluminum and finished to match the window frames. Interior doors are standard-size, dry-installed, solid or glazed, and veneered. The façade features a ventilated system with 10 cm thick mineral wool insulation and a cladding of natural stone panels. A portion of the basement levels is finished with an ETICS façade system, using 10 cm thick extruded polystyrene (XPS) insulation and a 0.5 cm thick light-colored polymer render. Soffits, cornices, balconies, and canopies are finished with a 0.5 cm thick layer of light-colored polymer render applied over 3 cm of thermal insulation. The flat roof is constructed from a 20 cm thick reinforced concrete slab, thermally and waterproof insulated. It is designed as a walkable terrace with a sun deck and swimming pool, including an equipment room for pool systems located beneath the sun deck. The slope of the roof surfaces is 1°. The roof is covered with ceramic tiles. Rainwater drainage is managed using roof drains and channels. Plumbing installations are executed according to the requirements for mixed residential and commercial use. Electrical installations are provided in all rooms. Heating and cooling in residential areas are powered by electricity using a combination of air-to-air multi-split systems and Daikin air-to-water heat pumps. In commercial areas, Daikin multi-split air conditioning systems are used. Circulation within the building is designed to enable fast and safe evacuation in emergencies. Vertical connection between floors is provided by internal staircases, a passenger lift, and a vehicle lift.
คำอธิบายพื้นที่ The foundations consist of a solid reinforced concrete slab with a thickness of 40 to 50 cm, fully waterproofed. Load-bearing walls are cast in-place reinforced concrete, formed using double-sided formwork and reinforced according to structural calculations. The wall thickness ranges from 15 to 25 cm and includes vertical and horizontal reinforced concrete tie beams. Basement walls located below ground level are protected with waterproofing. Partition walls are constructed using drywall (Knauf system) with a thickness of 10 to 15 cm. Floor slabs between levels are solid reinforced concrete with a thickness of 20 to 24 cm. The roof is a flat, walkable structure consisting of a 20 cm thick reinforced concrete slab, with thermal and waterproof insulation. Apartment floors are constructed as level floating floors with thermal insulation made of expanded polystyrene (EPS) 10 to 15 cm thick, over which screed and the final floor finish are applied. Cold floor areas are finished with first-class glazed ceramic tiles, while warm floor areas are finished with prefinished parquet. Interior staircases are made of reinforced concrete and finished with ceramic tiles. Entrance and terrace floors are finished with anti-slip ceramic tiles. Interior walls and ceilings are treated with rough and fine cement-lime plaster or plasterboard (Knauf), then smoothed and painted with light-colored semi-dispersive paint to enhance the reflection of natural and artificial light. In kitchen work areas, walls between base and wall cabinets are tiled with ceramic tiles. In bathrooms, ceramic tiles are applied up to a minimum height of 2.40 meters. Openings are designed to provide lasting protection against weather conditions, ensure natural lighting, thermal insulation, and ventilation during the building’s use. Natural lighting is provided through window and door openings, while artificial lighting is installed as needed according to the function of the space. Windows and external doors are fabricated from thermally broken aluminum profiles (SCHUCO AWS65), factory-produced and fitted with the necessary hardware. They are finished in anthracite color (RAL 7016) and glazed with triple-pane insulating glass (4 mm + 16 mm argon + 4 mm + 16 mm argon + 4 mm) with a low-emissivity (Low-E) coating. External shading is provided by motorized shutters or brise-soleils. Interior window sills are made of composite quartz, resistant to moisture, scratches, and impact, with a smooth surface. External sills are made of aluminum and finished to match the window frames. Interior doors are standard-size, dry-installed, solid or glazed, and veneered. The façade features a ventilated system with 10 cm thick mineral wool insulation and a cladding of natural stone panels. A portion of the basement levels is finished with an ETICS façade system, using 10 cm thick extruded polystyrene (XPS) insulation and a 0.5 cm thick light-colored polymer render. Soffits, cornices, balconies, and canopies are finished with a 0.5 cm thick layer of light-colored polymer render applied over 3 cm of thermal insulation. The flat roof is constructed from a 20 cm thick reinforced concrete slab, thermally and waterproof insulated. It is designed as a walkable terrace with a sun deck and swimming pool, including an equipment room for pool systems located beneath the sun deck. The slope of the roof surfaces is 1°. The roof is covered with ceramic tiles. Rainwater drainage is managed using roof drains and channels. Plumbing installations are executed according to the requirements for mixed residential and commercial use. Electrical installations are provided in all rooms. Heating and cooling in residential areas are powered by electricity using a combination of air-to-air multi-split systems and Daikin air-to-water heat pumps. In commercial areas, Daikin multi-split air conditioning systems are used. Circulation within the building is designed to enable fast and safe evacuation in emergencies. Vertical connection between floors is provided by internal staircases, a passenger lift, and a vehicle lift.
การวัดมีการตรวจสอบแล้ว ไม่
การวัดขึ้นอยู่กับ ข้อบังคับของบริษัท
พื้น 3
ชั้นที่พักอาศัย 1
สภาพของทรัพย์สิน ใหม่
ที่จอดรถ พื้นที่จอดรถ, โรงรถ
คุณลักษณะเด่น เครื่องปรับอากาศ
เข้าชม ทะเล
พื้นผิวของพื้น พื้นปาร์เก้
พื้นผิวห้องน้ำ กระเบื้อง
รายละเอียด คอมเพล็กซ์หรูในรีเยกา

รายละเอียดของตึกอาคารและอสังหาริมทรัพย์

การก่อสร้างเริ่มแล้ว 2024
ปีที่ก่อสร้าง 2026
พิธีเปิด 2026
ชั้น 5
ลิฟท์ ใช่
ระดับใบรับรองด้านพลังงาน A
เครื่องทำความร้อน ระบบทำความร้อนของเมือง, เครื่องไฟฟ้าทำความร้อน
วัสดุก่อสร้าง อิฐ, คอนกรีต
วัสดุด้านหน้าอาคาร คอนกรีต, หิน
พื้นที่ทั่วไป ห้องเก็บของ, ห้องช่าง, สระว่ายน้ำ, โรงรถ, ห้องโถงที่จอดรถ, ระเบียงดาดฟ้า
หมายเลขอ้างอิงอสังหาริมทรัพย์ RE-AB-Aparts
จำนวนพื้นที่จอดรถ 14
จำนวนตึกอาคาร 1
ภูมิประเทศ แฟลต
แนวชายฝั่ง (ม.) 10 เมตร
ถนน ใช่
มีความเป็นเจ้าของที่ดิน ค่าเช่า
สถานการณ์การวางแบบแปลน แปลนโดยละเอียด
โยธาเทศบาล น้ำ, ท่อระบายน้ำ, ไฟฟ้า

ระดับใบรับรองด้านพลังงาน

A

ค่าธรรมเนียมรายเดือน

ภาษีโรงเรือนและที่ดิน 3 € / ปี (114.27 ฿) (ประมาณการ)
การซ่อมบำรุง 2 € / เดือน (76.18 ฿) (ประมาณการ)

ค่าใช้จ่ายในการซื้อ

ภาษีการโอน 3 %

นี่คือจุดเริ่มต้นของการซื้ออสังหาริมทรัพย์ของคุณ

  1. กรอกแบบฟอร์มสั้น ๆ แล้วเราจะจัดการนัดหมายกับคุณ
  2. ตัวแทนของเราจะติดต่อคุณในทันทีและจัดการนัดหมายกับคุณ

คุณต้องการที่จะทราบข้อมูลเพิ่มเติมเกี่ยวกับอสังหาริมทรัพย์นี้หรือไม่

เกิดข้อผิดพลาดในขณะที่พยายามส่งคำขอการติดต่อ โปรดลองอีกครั้ง

กำลังโหลด

ขอบคุณสำหรับคำขอการติดต่อของคุณ เราจะติดต่อคุณในทันที!