参照番号で検索する
コンドミニアム
51000 Rijeka
新しい高級複合施設のアパート-ファーストライン
ガレージ付きのブティックレジデンスのプロジェクトで、リエカの素晴らしい海を一望できます！-海への第一線。
Ap.1。レベル-2。108平方メートル。2ベッドルームのアパート。価格は599,000ユーロです
販売価格
€599,000 (￥103,446,596)
部屋
3
寝室
2
バスルーム
2
居住エリア
108 m²基本詳細
| 掲載番号 | 669716 |
|---|---|
| 新築 | はい |
| 販売価格 | €599,000 (￥103,446,596) |
| 部屋 | 3 |
| 寝室 | 2 |
| バスルーム | 2 |
| トイレ付きバスルーム | 2 |
| 居住エリア | 108 m² |
| 他のスペースの面積 | 20 m² |
| 居住スペースの説明 | The foundations consist of a solid reinforced concrete slab with a thickness of 40 to 50 cm, fully waterproofed. Load-bearing walls are cast in-place reinforced concrete, formed using double-sided formwork and reinforced according to structural calculations. The wall thickness ranges from 15 to 25 cm and includes vertical and horizontal reinforced concrete tie beams. Basement walls located below ground level are protected with waterproofing. Partition walls are constructed using drywall (Knauf system) with a thickness of 10 to 15 cm. Floor slabs between levels are solid reinforced concrete with a thickness of 20 to 24 cm. The roof is a flat, walkable structure consisting of a 20 cm thick reinforced concrete slab, with thermal and waterproof insulation. Apartment floors are constructed as level floating floors with thermal insulation made of expanded polystyrene (EPS) 10 to 15 cm thick, over which screed and the final floor finish are applied. Cold floor areas are finished with first-class glazed ceramic tiles, while warm floor areas are finished with prefinished parquet. Interior staircases are made of reinforced concrete and finished with ceramic tiles. Entrance and terrace floors are finished with anti-slip ceramic tiles. Interior walls and ceilings are treated with rough and fine cement-lime plaster or plasterboard (Knauf), then smoothed and painted with light-colored semi-dispersive paint to enhance the reflection of natural and artificial light. In kitchen work areas, walls between base and wall cabinets are tiled with ceramic tiles. In bathrooms, ceramic tiles are applied up to a minimum height of 2.40 meters. Openings are designed to provide lasting protection against weather conditions, ensure natural lighting, thermal insulation, and ventilation during the building’s use. Natural lighting is provided through window and door openings, while artificial lighting is installed as needed according to the function of the space. Windows and external doors are fabricated from thermally broken aluminum profiles (SCHUCO AWS65), factory-produced and fitted with the necessary hardware. They are finished in anthracite color (RAL 7016) and glazed with triple-pane insulating glass (4 mm + 16 mm argon + 4 mm + 16 mm argon + 4 mm) with a low-emissivity (Low-E) coating. External shading is provided by motorized shutters or brise-soleils. Interior window sills are made of composite quartz, resistant to moisture, scratches, and impact, with a smooth surface. External sills are made of aluminum and finished to match the window frames. Interior doors are standard-size, dry-installed, solid or glazed, and veneered. The façade features a ventilated system with 10 cm thick mineral wool insulation and a cladding of natural stone panels. A portion of the basement levels is finished with an ETICS façade system, using 10 cm thick extruded polystyrene (XPS) insulation and a 0.5 cm thick light-colored polymer render. Soffits, cornices, balconies, and canopies are finished with a 0.5 cm thick layer of light-colored polymer render applied over 3 cm of thermal insulation. The flat roof is constructed from a 20 cm thick reinforced concrete slab, thermally and waterproof insulated. It is designed as a walkable terrace with a sun deck and swimming pool, including an equipment room for pool systems located beneath the sun deck. The slope of the roof surfaces is 1°. The roof is covered with ceramic tiles. Rainwater drainage is managed using roof drains and channels. Plumbing installations are executed according to the requirements for mixed residential and commercial use. Electrical installations are provided in all rooms. Heating and cooling in residential areas are powered by electricity using a combination of air-to-air multi-split systems and Daikin air-to-water heat pumps. In commercial areas, Daikin multi-split air conditioning systems are used. Circulation within the building is designed to enable fast and safe evacuation in emergencies. Vertical connection between floors is provided by internal staircases, a passenger lift, and a vehicle lift. |
| その他スペースの説明 | The foundations consist of a solid reinforced concrete slab with a thickness of 40 to 50 cm, fully waterproofed. Load-bearing walls are cast in-place reinforced concrete, formed using double-sided formwork and reinforced according to structural calculations. The wall thickness ranges from 15 to 25 cm and includes vertical and horizontal reinforced concrete tie beams. Basement walls located below ground level are protected with waterproofing. Partition walls are constructed using drywall (Knauf system) with a thickness of 10 to 15 cm. Floor slabs between levels are solid reinforced concrete with a thickness of 20 to 24 cm. The roof is a flat, walkable structure consisting of a 20 cm thick reinforced concrete slab, with thermal and waterproof insulation. Apartment floors are constructed as level floating floors with thermal insulation made of expanded polystyrene (EPS) 10 to 15 cm thick, over which screed and the final floor finish are applied. Cold floor areas are finished with first-class glazed ceramic tiles, while warm floor areas are finished with prefinished parquet. Interior staircases are made of reinforced concrete and finished with ceramic tiles. Entrance and terrace floors are finished with anti-slip ceramic tiles. Interior walls and ceilings are treated with rough and fine cement-lime plaster or plasterboard (Knauf), then smoothed and painted with light-colored semi-dispersive paint to enhance the reflection of natural and artificial light. In kitchen work areas, walls between base and wall cabinets are tiled with ceramic tiles. In bathrooms, ceramic tiles are applied up to a minimum height of 2.40 meters. Openings are designed to provide lasting protection against weather conditions, ensure natural lighting, thermal insulation, and ventilation during the building’s use. Natural lighting is provided through window and door openings, while artificial lighting is installed as needed according to the function of the space. Windows and external doors are fabricated from thermally broken aluminum profiles (SCHUCO AWS65), factory-produced and fitted with the necessary hardware. They are finished in anthracite color (RAL 7016) and glazed with triple-pane insulating glass (4 mm + 16 mm argon + 4 mm + 16 mm argon + 4 mm) with a low-emissivity (Low-E) coating. External shading is provided by motorized shutters or brise-soleils. Interior window sills are made of composite quartz, resistant to moisture, scratches, and impact, with a smooth surface. External sills are made of aluminum and finished to match the window frames. Interior doors are standard-size, dry-installed, solid or glazed, and veneered. The façade features a ventilated system with 10 cm thick mineral wool insulation and a cladding of natural stone panels. A portion of the basement levels is finished with an ETICS façade system, using 10 cm thick extruded polystyrene (XPS) insulation and a 0.5 cm thick light-colored polymer render. Soffits, cornices, balconies, and canopies are finished with a 0.5 cm thick layer of light-colored polymer render applied over 3 cm of thermal insulation. The flat roof is constructed from a 20 cm thick reinforced concrete slab, thermally and waterproof insulated. It is designed as a walkable terrace with a sun deck and swimming pool, including an equipment room for pool systems located beneath the sun deck. The slope of the roof surfaces is 1°. The roof is covered with ceramic tiles. Rainwater drainage is managed using roof drains and channels. Plumbing installations are executed according to the requirements for mixed residential and commercial use. Electrical installations are provided in all rooms. Heating and cooling in residential areas are powered by electricity using a combination of air-to-air multi-split systems and Daikin air-to-water heat pumps. In commercial areas, Daikin multi-split air conditioning systems are used. Circulation within the building is designed to enable fast and safe evacuation in emergencies. Vertical connection between floors is provided by internal staircases, a passenger lift, and a vehicle lift. |
| エリアの説明 | The foundations consist of a solid reinforced concrete slab with a thickness of 40 to 50 cm, fully waterproofed. Load-bearing walls are cast in-place reinforced concrete, formed using double-sided formwork and reinforced according to structural calculations. The wall thickness ranges from 15 to 25 cm and includes vertical and horizontal reinforced concrete tie beams. Basement walls located below ground level are protected with waterproofing. Partition walls are constructed using drywall (Knauf system) with a thickness of 10 to 15 cm. Floor slabs between levels are solid reinforced concrete with a thickness of 20 to 24 cm. The roof is a flat, walkable structure consisting of a 20 cm thick reinforced concrete slab, with thermal and waterproof insulation. Apartment floors are constructed as level floating floors with thermal insulation made of expanded polystyrene (EPS) 10 to 15 cm thick, over which screed and the final floor finish are applied. Cold floor areas are finished with first-class glazed ceramic tiles, while warm floor areas are finished with prefinished parquet. Interior staircases are made of reinforced concrete and finished with ceramic tiles. Entrance and terrace floors are finished with anti-slip ceramic tiles. Interior walls and ceilings are treated with rough and fine cement-lime plaster or plasterboard (Knauf), then smoothed and painted with light-colored semi-dispersive paint to enhance the reflection of natural and artificial light. In kitchen work areas, walls between base and wall cabinets are tiled with ceramic tiles. In bathrooms, ceramic tiles are applied up to a minimum height of 2.40 meters. Openings are designed to provide lasting protection against weather conditions, ensure natural lighting, thermal insulation, and ventilation during the building’s use. Natural lighting is provided through window and door openings, while artificial lighting is installed as needed according to the function of the space. Windows and external doors are fabricated from thermally broken aluminum profiles (SCHUCO AWS65), factory-produced and fitted with the necessary hardware. They are finished in anthracite color (RAL 7016) and glazed with triple-pane insulating glass (4 mm + 16 mm argon + 4 mm + 16 mm argon + 4 mm) with a low-emissivity (Low-E) coating. External shading is provided by motorized shutters or brise-soleils. Interior window sills are made of composite quartz, resistant to moisture, scratches, and impact, with a smooth surface. External sills are made of aluminum and finished to match the window frames. Interior doors are standard-size, dry-installed, solid or glazed, and veneered. The façade features a ventilated system with 10 cm thick mineral wool insulation and a cladding of natural stone panels. A portion of the basement levels is finished with an ETICS façade system, using 10 cm thick extruded polystyrene (XPS) insulation and a 0.5 cm thick light-colored polymer render. Soffits, cornices, balconies, and canopies are finished with a 0.5 cm thick layer of light-colored polymer render applied over 3 cm of thermal insulation. The flat roof is constructed from a 20 cm thick reinforced concrete slab, thermally and waterproof insulated. It is designed as a walkable terrace with a sun deck and swimming pool, including an equipment room for pool systems located beneath the sun deck. The slope of the roof surfaces is 1°. The roof is covered with ceramic tiles. Rainwater drainage is managed using roof drains and channels. Plumbing installations are executed according to the requirements for mixed residential and commercial use. Electrical installations are provided in all rooms. Heating and cooling in residential areas are powered by electricity using a combination of air-to-air multi-split systems and Daikin air-to-water heat pumps. In commercial areas, Daikin multi-split air conditioning systems are used. Circulation within the building is designed to enable fast and safe evacuation in emergencies. Vertical connection between floors is provided by internal staircases, a passenger lift, and a vehicle lift. |
| 測定確認済み | いいえ |
| に基づく測定 | 定款 |
| フロア | 3 |
| 住宅階 | 1 |
| 状態 | 新しい |
| 駐車場 | 駐車スペース, ガレージ |
| 特徴 | 冷房 |
| 景色 | 海 |
| 床面 | 寄木細工 |
| 浴室の表面 | タイル |
| 記述 | リエカの高級複合施設 |
建物と物件の詳細
| 建築が開始しました | 2024 |
|---|---|
| 建築年度 | 2026 |
| 落成式 | 2026 |
| 床 | 5 |
| リフト | はい |
| エネルギー証書のクラス | A |
| 暖房 | 地域暖房, 電気暖房 |
| 建築材料 | レンガ, コンクリート |
| ファサード素材 | コンクリート, 石 |
| 共通エリア | 収納, 技術室, 水泳プール, ガレージ, 駐車場, 屋上テラス |
| 物件参照番号 | RE-AB-Aparts |
| 駐車スペース数 | 14 |
| 建物数 | 1 |
| 地帯 | 平地 |
| 湾岸線 | 10 m |
| 道路 | はい |
| 土地所有権 | 賃貸 |
| 計画状況 | 詳細計画 |
| 自治体のエンジニアリング | 水道, 下水, 電気 |
エネルギー証書のクラス
月額料金
| 固定資産税 | 3 € / 年 (518.1 ¥) (見積り) |
|---|---|
| メンテナンス | 2 € / 月 (345.4 ¥) (見積り) |
購入費用
| 譲渡税 | 3 % |
|---|
これが物件の購入の始まりです。
- 簡単なフォームに記入していただければ、ミーティングの手配をさせていただきます。
- 担当者が直ちにお客様に連絡し、ミーティングの手配をさせていただきます。
この物件についてもっと知りたいですか？
お問い合わせ依頼をいただき、ありがとうございます。すぐにご連絡差し上げます。